• Latest News

    Sunday 1 February 2015

    How To Backup / Restore Stock ROM with SP Flash Tool

    There are lots of MTK smartphone users out there most 
    especially on local-branded smart phone users who have 
    lots of worries on damaging their devices from tweaking it. 
    Why? Lack of developers corresponds the number of development 
    available for the device and we know for the fact that without 
    backup such as ROM or a stock ROM, fixing most android problems 
    such as soft bricks, boot loops, or even hard bricks are too 
    difficult to handle.


    Create your own Stock ROM for your 

    MediaTek (MTK) Android Smartphone




    Thanks to XDA members who contributed to MTK development, 
    Mediatek smartphone users can now be able to create their own 
    Stock ROM and use it as a backup whenever serious matters 
    occur to their loved devices. With the use of prepacked tools, 
    MTK android users no longer needs much developer for their 
    device because they can be one.



    How To Make, Backup and Restore 

    Stock ROM Flashable with SP FlashTool



    On this article, I will be guiding you how to 
    make your own Stock ROM, use it as your own backup 
    and restore it through flashing from SP Flash Tool. Why 
    from SP Flash Tool? With SP Flash Tool, even a corrupted, 
    hard-bricked android device can still be revived and fixed 
    which was considered the best method of repairing any android 
    software problem. 



    On this tutorial, we will be using SP Flash Tool and MTK Droid 
    Tools to successfully make a flashable Stock ROM for our MediaTek devices.



    Requirements:


    • Any MTK android device running a Stock ROM. 
       (Note: if your device was rooted, then you'll get a rooted 
       Stock ROM, otherwise if your device does not have root 
       access, you'll get unrooted Stock ROM):

    MT6595, MT6592, MT6589, MT6582, MT6577, MT6575, 

    MT6572, or any MT65xx

    • Computer with Windows operating system
    • USB Cable
    • At least 500 Mb free phone storage
    • MTK USB Drivers - Download it here (credits to 
              the developer of this tool)
              recommended or latest version)
    • ClockworkMod (CWM) Recovery
                ==>For unrooted device (follow how to flash CWM Recovery without root)

    Preparations (Please Read):



    Make sure to prepare all the necessary requirements before 
    proceeding or else, proceeding below is just a waste.
    You must have the device in hand with CWM recovery. 
    Download and install the MTK USB Drivers in your computer, 
    it contains 6 other USB drivers needed to detect your device. 
    Also, you must download MTK Droid Tools and SP Flash Tool, 
    extract them to any location or folder you are comfortable of accessing. 
    If all are ready, let's proceed to the instructions.

     Instructions:

    Creating Stock ROM Backup


    First, reboot your MTK android device into 
    CWM Recovery and connect your device to your 
    computer using USB Cable.

    cwm recovery 
    From your computer, Open MTK Droid Tools.exe, run 
    it as administrator. Wait for your device to be detected 
    since you have installed the USB drivers. You will notice 
    that color on the lower-left corner of the tool will turn cyan-blue.
    mtk droid tools

    On MTK Droid Tools, click on root, backup, recovery tab 

    and click the Backup button to start full stock ROM backup.
    mtk backup

    Wait for the tool to backup your whole Stock ROM. 
    You can see that the ROM backup will be saved on  
    \MtkDroidTools\backups.

    backup android
    Wait until a prompt will appear asking you "Pack-up the backup
    or something like that, press NO, it will just compress the backup 
    you have made and what we need is the uncompressed ROM backup.

    Check the status message and check is the task is completed. "Task ended".

    It is not done yet, we have to prepare this backup to make it 
    flashable through SP Flash Tool. To do it, click on To prepare 
    blocks for Flash Tool.

    flash backup
    A new windows will appear asking fol a .md5 file of the backup. 
    So navigate to the MTK Droid Tools folder where your backup 
    is found. Open the backup that your have created earlier and 
    select the files.md5 click OPEN.
    flash rom backup

    Wait for MTK Droid Tools to copy the files for 
    SP Flash Tool, check the status messages until the copying is complete.

    stock rom backup
    When the tool is done, you have now created 
    the Stock ROM backup of your device!



    How To Restore the Stock ROM of your MTK device?


    Open SP Flash Tool.exe, run as administrator. 
    Load the scatter file (click scatter-loading) which 
    you have prepared from MTK Droid Tools to be 
    flashable through SP Flash Tool. It can be found in 
    the !Files_to_FlashTool folder of your Stock ROM 
    backup (only if you have just made a backup) or from 
    where you have saved or placed the Stock ROM. 
    But in my case, I saved it on !Files to FlashTool folder.

    sp flash tool scatter
    After you loaded the scatter file, it will look like the 
    image below. All must checked except for Cache and  
    User Data, and most importantly, do not check  
    Preloader and DSP_BL or else you'll brick it. Those 
    checked partitions will be restored, make sure not to 
    touch or move the backup files so that your phone will 
    be restored in your previous stock ROM, also to avoid 
    boot loops and bricking.

    As you can see, the Stock ROM partition backups are 
    found on its specific locations under location column. 
    If the locations do not appear (except for CACHE and  
    USRDATA), the backup stock ROM is not in the proper 
    place. To fix that, you must move the files of the stock 
    ROM to the same location where the Scatter file is stored.

    To restore or flash the Stock ROM backup, first, turn OFF  
    your MTK android device and remove the USB cable. If your 
    phone was already turned OFF, click Download from SP Flash 
    Tool, a prompt will appear, just click YES. Immediately 
    connect your turned OFF device to your computer via USB Cable.

    download rom 
    Wait for the tool to detect your device and restore the Stock 
    ROM that you have made. An alert with a green circle appears 
    after successfully downloading the ROM.
    download ok

      You have successfully restored the stock ROM.


    Drop your comment

    Similar Post:
    • Blogger Comments
    • Facebook Comments

    19 comments:

    1. Sanxy you are a phone saver no doubt I just fixed my phone with boot up loop issues now. Thanks and keep up the good work

      ReplyDelete
      Replies
      1. How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download Now

        >>>>> Download Full

        How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download LINK

        >>>>> Download Now

        How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download Full

        >>>>> Download LINK Gs

        Delete
    2. Can I use this method to get my infinix zero ROM?

      ReplyDelete
    3. Good one, am going to back mine up asap b4 any phone crash

      ReplyDelete
    4. Thanks. but u only mentioned unrooted device. what about CWM recovery for rooted device? do i follow same process u used for unrooted devices. am waiting 2 get my infinix zero (rooted) backed up please.

      Thanks

      ReplyDelete
      Replies
      1. Follow the same procedure, your infinix zero should be up and running in no time. You will have to boot up Infinix zero to boot up logo when you connect it to PC by press the volume up key while you connect to your pc

        Delete
    5. please does this method work for an already bricked phone?

      ReplyDelete
    6. my infinix hot note is passworded. i tried formatting but it didnt work. can i still use your method to back up and restore the custom rom

      ReplyDelete
      Replies
      1. Yes you can use the method, what do u mean exactly by passworded. What can't you access?

        Delete
    7. Need help with my infinite hot,after system update it booted to recovery mode and has remain like that

      ReplyDelete
      Replies
      1. You will need to download d boot.img and recovery.img and follow the procedure above.go to xda forum n download d files with scatter file for your phone

        Delete
      2. This comment has been removed by the author.

        Delete
    8. the scatter files are not being downloaded from sp flash tool...what to do?

      ReplyDelete
      Replies
      1. You will have to navigate to where you extract your scatter file and stock rom for it to load

        Delete
    9. pls can any1 upload the backup scatterfile for infinix hot x507

      ReplyDelete
    10. How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download Now

      >>>>> Download Full

      How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download LINK

      >>>>> Download Now

      How To Backup / Restore Stock Rom With Sp Flash Tool - Sn Tech >>>>> Download Full

      >>>>> Download LINK JL

      ReplyDelete

    Kindly drop your comments for us to help you better.
    Thanks see you soon.

    Item Reviewed: How To Backup / Restore Stock ROM with SP Flash Tool Rating: 5 Reviewed By: Unknown
    Scroll to Top