This is a run through how to flash stock rom to your android devices which has MediaTek chipset installed within it. Most people bricked their device or have the cause to go back to their Stock Rom for better Performance.
This post will teach every reader on how to flash their phones with Pc.
==> Vcom drivers
==> SP FlashTool
==> Stock Rom For that device
==> Good USB Cable
This post will make use of how to installed drivers using Vcom rather than Pdanet, because i noticed most have challenges installing the drivers required.
==> Download Vcom drivers here /Size 342.4KB
==> Windows 8,8.1 and 10 click here
==> Click here to learn how to install Vcom drivers
==> Extract the Vcom drivers
==> Go to your 'Device Manager'
==> Click 'Action', select 'Add legacy hardware'
==> Click 'Next', select 'Install the hardware I manually select from a list'
==> Click 'Next' after the little search
==> Select 'Show All Device' and click 'Next'
==> Select 'Have Disk'
==> Browse to the location of the Vcom drivers
==> Select 'MediaTek Preloader usb vcom driver' and click 'Next'
==> Now download SP FlashTool here /Size 36MB
Linux 64 bit download here.
==> Extract Sp flashtool
==> Open the extracted Sp flashtool folder
==> Run Sp FlashTool.exe as 'Admin'
==> Click on 'Scatter loading' and navigate to the stock rom extracted file
==> Select the 'MTXX_Android_scatter.txt'
==> Select 'Firmware Upgrade' and click 'Download'
==> Connect your device to the pc via Usb in 'Download Mode'
==> Wait for the process to finish and get a 'Tick Display'
Now disconnect your phone from the PC and you have successfully flashed stock rom to your device.
Similar Post:
This post will teach every reader on how to flash their phones with Pc.
Requirements For Flashing
==> Vcom drivers
==> SP FlashTool
==> Stock Rom For that device
==> Good USB Cable
This post will make use of how to installed drivers using Vcom rather than Pdanet, because i noticed most have challenges installing the drivers required.
How To Flash MTK Devices With Stock Rom
==> Download Vcom drivers here /Size 342.4KB
==> Windows 8,8.1 and 10 click here
==> Click here to learn how to install Vcom drivers
==> Extract the Vcom drivers
==> Go to your 'Device Manager'
==> Click 'Action', select 'Add legacy hardware'
==> Click 'Next', select 'Install the hardware I manually select from a list'
==> Click 'Next' after the little search
==> Select 'Show All Device' and click 'Next'
==> Select 'Have Disk'
==> Browse to the location of the Vcom drivers
==> Select 'MediaTek Preloader usb vcom driver' and click 'Next'
==> Now download SP FlashTool here /Size 36MB
Linux 64 bit download here.
==> Extract Sp flashtool
==> Open the extracted Sp flashtool folder
==> Run Sp FlashTool.exe as 'Admin'
==> Click on 'Scatter loading' and navigate to the stock rom extracted file
==> Select the 'MTXX_Android_scatter.txt'
==> Select 'Firmware Upgrade' and click 'Download'
==> Connect your device to the pc via Usb in 'Download Mode'
==> Wait for the process to finish and get a 'Tick Display'
Now disconnect your phone from the PC and you have successfully flashed stock rom to your device.
Similar Post:
nice on mr Yusuf .. abeg addme ooooooo am begging Mubiy..
ReplyDeleteNice Web Upgrade. Good job.
ReplyDelete